In House Facilities

A heavy-duty centerless grinder that finishes the outer diameter of pins and shafts without holding them between centers. It supports through-feed grinding for fast, continuous high-volume runs, and plunge grinding for parts with shoulders or steps. The result is a smooth, round and accurately sized surface on every piece.

• Ultra-high accuracy

• Through-feed & plunge grinding

• Wide grinding capacity

• Rigid, vibration-damped structure

robust German-engineered centerless grinder built for continuous cylindrical grinding with excellent stability. It is ideal for long production runs of kingpins, spring pins and bushes, where every part must be the same size. The heavy cast bed absorbs vibration for a consistent finish shift after shift.

• Hydrodynamic wheel spindle

• Through-feed / infeed grinding

• Micron-level size control

• Vibration-damped cast bed

A CNC cylindrical grinder for accurate outer diameter grinding of shafts and stepped components held between centers. Smooth hydraulic motion and an adjustable wheel head let it handle tapers, shoulders and multiple diameters on a single part. It is well suited to camshafts and other complex shaft profiles.

• Hydraulic table traverse system

• Variable workhead speed drive

• Swiveling wheel head adjustment

• Ground guideways

A double-disc grinder that grinds both faces of a part at the same time. This gives washers, thrust rings and spacers perfectly parallel, flat surfaces with exact thickness. Through-feed automation makes it highly efficient for mass production.

• Dual opposed grinding spindles

• Simultaneous double-face grinding

• Through-feed automation system

• Hydraulic rotary dresser system

Induction hardening creates a hard, wear-resistant surface while keeping the core of the part tough and crack-resistant. Programmable scan cycles and closed-loop temperature control give an even hardened layer to the exact depth required. This is what gives our pins and shafts their long service life under heavy loads.

• IGBT-based medium frequency power

• Programmable scan hardening cycles

• Closed-loop temperature control

• Automated quench integration

After hardening, parts are tempered in this controlled furnace to relieve internal stresses and increase toughness. Uniform heat circulation and programmable soak cycles treat every part in the batch identically. The result is a component that is both hard and durable, and won't crack in service.

• Uniform convection heat circulation

• PID temperature control system

• Programmable soak cycles

• High-efficiency insulation lining

A multi-axis CNC turning center with twin spindles and dual Y-axis capability. It can machine both ends of a part and perform milling and drilling operations in a single setup. Fewer setups mean higher accuracy, shorter cycle times and lower cost per part.

• Twin spindle synchronous machining

• Dual Y-axis multitasking capability

• BMT twin turret (24/48 tools)

• Hybrid box + LM guideways

A Swiss-type sliding head machine that produces small, complex parts with exceptional accuracy. The integrated bar feeder allows continuous, unattended production, while the sub-spindle finishes the back of each part in the same cycle. It is ideal for small pins, bushes and detailed components.

• Guide bush / bushless operation

• 7–9 axis simultaneous control

• 32 mm bar capacity

• Sub-spindle back machining

A high-rigidity CNC turning center with twin spindles, twin turrets and live tooling. It completes complex components, including turning, milling and drilling, in one continuous operation from bar stock. The rigid box-guideway structure keeps accuracy steady even during heavy cutting.

• Twin spindle twin turret

• Y-axis live tooling turret

• 42 mm bar capacity

• Box guideway rigid structure

A fleet of five compact, high-rigidity CNC lathes, built for efficient small-part machining in high volumes. Thermal compensation keeps dimensions stable through long runs, and load detection protects both tools and parts. Together they give us flexible capacity for multiple jobs at once.

• 8-station turret configuration

• Thermal displacement compensation

• Abnormal load detection system

• 24 m/min rapid traverse

A high-dynamic vertical machining center for milling, drilling and tapping operations. Rapid axis movement and a 20-tool automatic changer let it complete multiple operations quickly in a single setup. It stays stable and accurate even under heavy cutting conditions.

• BT-40 high-speed spindle

• 40 m/min rapid traverse

• 20-tool automatic tool changer

• Linear motion guideways

A rigid C-frame vertical machining center built for stable milling and efficient die and mould work. Its broad column structure resists vibration for accurate cuts and fine surface finish. We use it for both production parts and in-house tooling and fixtures.

• Broad column rigid structure

• BT-40 high-speed spindle

• Linear guideway axis system

• 20-tool automatic changer

A fully automated CNC turning system with two spindles working in parallel and a gantry robot that loads and unloads parts. It runs high-speed production of small to medium components with minimal manual handling. That means faster output, consistent quality and lower cost for large orders.

• Twin spindle parallel machining

• Gantry-type automatic loading

• 135 mm turning capacity

• Compact high-speed cycle design

A heavy-duty CNC lathe with a rigid 45° slant-bed structure, built for heavy cutting on larger components. Its high-torque spindle and servo turret deliver powerful, accurate machining with consistent output. It is ideal for tough materials and demanding production schedules.

• Monoblock 45° slant bed

• High-torque rigid spindle

• Linear motion guideways

• Bi-directional servo turret

A linear-motion CNC machine built for larger-format work, combining rigidity with smooth, accurate movement. Its vibration-resistant structure and advanced control allow versatile machining across different materials. It extends our capability to bigger components.

• High-precision linear motion system

• 1500 × 3000 mm work area

• Rigid vibration-resistant structure

• Advanced CNC control integration

Three compact, high-rigidity CNC lathes designed for fast cycle times and stable performance in batch production. The 30° slant bed and servo turret allow quick tool changes and smooth chip flow. Running three machines gives us the capacity to handle multiple part numbers in parallel.

• 30° slant bed monoblock

• Bi-directional servo turret

• 4000 rpm high-speed spindle

• Linear motion guideways

A heavy-duty CNC turning machine with roller linear guideways and a ground ballscrew for accurate, repeatable movement. It handles bar stock up to Ø50 mm, making it suited to a wide range of pins, bushes and shafts. Efficient cycle times keep batch production on schedule.

• Roller type linear guideways

• Ground ballscrew (double nut)

• 4000 rpm high-speed spindle

• Ø50 mm bar capacity

A compact yet robust CNC turning center with a vertical monoblock structure for excellent rigidity. Fast tool changes and stable thermal performance keep dimensions consistent through long production runs. It is ideal for smaller components that need tight tolerances.

• 90° vertical monoblock structure

• Bi-directional servo turret

• 4500 rpm high-speed spindle

• Preloaded double-nut ballscrew

A compact CNC turning center built for efficient machining of small components with stable accuracy. Its high-torque spindle and servo turret deliver optimised cycle times for everyday production. It adds flexible capacity alongside our larger machines.

• Roller type linear guideways

• Ground ballscrew (double nut)

• 8-station servo turret

• 3000 rpm high-torque spindle

A special-purpose machine that faces both ends of a shaft and drills center holes simultaneously. These center holes become the reference points for all later turning and grinding, so their accuracy sets the quality of the finished part. Four spindles working together make it fast and reliable for mass production.

• 4-spindle simultaneous machining

• Cartridge-type spindle design

• 500–2000 rpm spindle range

• Hardened guideway slide system

Every part starts here. This high-speed CNC circular saw cuts steel bars into accurate blanks, ready for turning and grinding. The integrated bar feeder and servo-driven feed run continuously with minimal operator input, while the carbide blade gives clean, square cuts that reduce material waste. Accurate blanks at the start mean less machining time and more consistent parts at the end.

• Ø80 mm bar cutting capacity

• Servo-driven feed axis

• PLC + HMI control system

• TCT carbide blade system

A custom-built CNC drilling machine designed for high-volume, multi-hole drilling. Several spindles drill at the same time while dedicated fixtures hold each part in exactly the same position, cycle after cycle. The result is accurately placed holes, fast cycle times and consistent quality across large production runs.

• Multi-spindle synchronous drilling

• CNC/PLC controlled operation

• Fixture-based positional accuracy

• High-speed repetitive drilling cycles